Nvidia Creative Graphics Blaster RIVA TNT2 - Manual (Page 6)

6 Graphics Blaster RIVA TNT2 Value Installation Guide
Installing Software After installing the graphics card, you can install the software. The Graphics Blaster RIVA
TNT2 Value CD contains the following:
❑ Drivers for Windows 95/98 (common to both)
❑ Drivers for Windows NT 4.0
❑ Creative Enhanced BlasterControl
™
for Windows 95/98 and Windows NT 4.0
❑ Creative SoftMPEG for Windows 95/98
❑ Sonnetech Colorific
®
/3Deep
™
for Windows 95/98 and Windows NT 4.0
This section is organized as follows:
❑ To install in Windows 95 (Retail version)
❑ To install in Windows 95 (OSR version 2.0 and later)
❑ To install in Windows 98
❑ To install in Windows NT 4.0 (Service Pack 3)
To install in
Windows 95
(Retail version) 1. Switch on your system.
Windows 95 automatically detects the
graphics card.
A New Hardware Found message box
appears, informing you that a display
adapter has been detected.
2. When a dialog box similar to Figure 5
appears, ensure that the Driver from disk
provided by hardware manufacturer
option is selected.
3. Click the OK button.
4. Insert the Graphics Blaster RIVA TNT2
Value CD into your CD-ROM drive.
Figure 5: Selecting the Driver from disk provided by
hardware manufacturer option.
GB_M64.fm Page 6 Monday, May 31, 1999 10:42 AM