Nortel Networks NORSTAR VOICE MAIL 4.0 FAX P0886629 - Manual (Page 21)

18 Setting up and maintaining FAX
FAX Set Up and Operation Guide P0886629 Issue 1.0
Changing the Fax Overflow Mailbox parameters
You can change any parameter assigned to a Fax Overflow Mailbox. This does not
include the mailbox number. If you need to change a mailbox number, you must
first delete the mailbox and then add the new Fax Overflow Mailbox. For
instructions about adding a mailbox, refer to
"Adding a Fax Overflow Mailbox" on
page 16. For instructions about deleting a mailbox, refer to "Deleting a Fax
Overflow Mailbox" on page 19.
The Fax Overflow Mailbox parameters appear in the same order as they appear
when you add a Fax Overflow Mailbox. This section shows you how to select the
change feature. It does not show you how to change each parameter.
Changing the parameters of a Fax Overflow Mailbox involve:
• locating the display with the parameter you want to change
• pressing CHNG
• entering the new parameter value
To change the parameters of a Fax Overflow Mailbox:
1. Press
ƒ · ° ‹.
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press MBOX.
4. Press CHNG.
5. Enter the Fax Overflow Mailbox number.
6. To select a parameter, press NEXT until the display
shows the parameter you want to change. To change
the parameter, press CHNG and enter the new
parameter value.
7. Press
® to end this programming session.
Log:
QUIT RETRY
Admin
AA OTHR
Mailbox Admin
ADD DEL
Mbox:
DIR QUIT
Ext: <x>
CHNG