Requirements, Switch set up, Ip interfaces – Nortel Networks ALTEON OS BMD00009 User Manual

Page 10: Requirements 10 switch set up 10, Ip interfaces 10

Advertising
background image

Alteon OS BBI Quick Guide

10

„

Getting Started

BMD00009, November 2007

Requirements

„

GbE Switch Module

„

Installed Alteon OS switch software

„

PC or workstation with network access to the switch’s management interface, as config-
ured using the management module

„

Frame-capable Web-browser software, such as the following:

†

Netscape Navigator 4.7x or higher

†

Internet Explorer 6.0x or higher

†

Mozilla FireFox 1.0.4 or higher

„

JavaScript enabled in your Web browser

Switch Set Up

Before you can access the BBI, minimal configuration is required on the GbE Switch Module.

IP Interfaces

At least one IP interface must be configured on the switch. This is configured from the man-
agement module and not the command-line interface. The management module assigns the
management IP address by default, starting at 192.168.70.127 for I/O module slot 1 through
192.168.70.130 for I/O module slot 4.

Each IP interface address provides a point of access for Alteon OS switch management. The
default management interface is 128, which allows access to Alteon OS switch management
via the management module network only.

For complete information about configuring IP interfaces, see your GbE Switch Module
Installation Guide
.

Advertising