Nortel Networks ALTEON OS BMD00009 - Manual (Page 18)

Alteon OS BBI Quick Guide
18 „ Browser-Based Interface Basics BMD00009, November 2007
Commands
The following general commands are available on the toolbar:
Apply Pending configuration changes do not take effect until you click the Apply
command. Once applied, all changes take effect on the switch immediately. If
you do not save the changes, however, they will be lost the next time the
switch is rebooted.
Save Writes applied configuration changes to non-volatile flash memory on the
switch.
Revert Removes pending configuration changes made since the last Apply command.
Use this command to remove pending configuration changes made since the
last Apply command.
Diff Show any pending configuration changes.
Dump Generates a dump of critical state information in the switch.
Show Log Opens a new Web-browser window for displaying the most recent switch log
messages. Close the log browser when finished.
Help Opens a new Web-browser window for displaying the basic online help infor-
mation. Close the help browser when finished.
Logout Log off the switch and exit the BBI.