Nextel comm IR1200 - Manual (Page 29)

Vehicle Installation
RFM-4200-5015 Rev1 21
Mount the Modem
The following table lists the steps for mounting the iR1200 data modem in a
vehicle.
1 Determine a convenient location in the vehicle.
2 Use the iR1200 modem and mark the positions of the holes
on the mounting surface.
3 Drill the holes in the marked location.
4 Mount the unit using the #10 sheet metal screws.
Mounting the Antenna(s)
The location of the antenna should be chosen carefully.
!
Important things to consider when installing the
antenna equipment.
• Installation of recommended equipment must be
installed in accordance with Nextel’s installation
instructions.
• To assure compliance with United States FCC
regulations on RF exposure, equipment must be
installed in such a way as to maintain a separation
of at least 8 inches (20 cms) between the antenna
and the human body.
• Ensure that the antenna is properly installed
external to the vehicle and in accordance with the
requirements of the antenna manufacturer/supplier.
• Use only an approved antenna. Unauthorized
antennas, modifications or attachments could impair
call quality, damage the modem, or result in the
violation of FCC mandates.