National Instruments PXI-8184 - Manual (Page 35)

Chapter 3 I/O Information
NI PXI-8184/8185 User Manual 3-4 ni.com
COM1 and COM2
Figure 3-3 shows the location and pinouts for the COM1 and COM2
connectors on the NI PXI-8184/8185. Table 3-3 lists and describes the
COM1 and COM2 connector signal.
AMP manufactures a serial port mating connector, part number 745491-5.
Figure 3-3. COM1 and COM2 Connector Location and Pinout
10 GND Ground
11 NC Not Connected
12 SD Serial Data
13 HSync Horizontal Sync
14 VSync Vertical Sync
15 SC Serial Clock
Table 3-2. VGA Connector Signals (Continued)
Pin Signal Name Signal Description
COM1
1
5 9
6
COM2
1
5 9
6