Nortel Networks CTA 150i - Manual

Read Me First / À lire / Léame primero
CTA 150 i Installation Update
Some recent versions of software require a different installation procedure than
the one described in the CTA 150
i Installation Guide.
Follow the steps below when installing the CTA 150 i with any
software.
1. Install the enclosed software before installing the CTA 150 i hardware.
The directions for installing the software are included with the software.
Note: If you received the Personal Productivity Suite CD-ROM with
your CTA 150
i, the instructions for installing recent versions of
Norstar TAPI Service Provider are included on the CD-ROM.
The installation instructions on pages 9 -15 of the CTA 150
i
Installation Guide are for installing Norstar TAPI Service
Provider 1.1 or 1.2 only.
2. After the software installation is complete, look for the help file named
CTA150Config.hlp . If available, this help file is in the Help directory in
your Windows directory.
If this help file is in the directory, follow the instructions in the help file
to install the CTA 150
i. These instructions replace the hard copy
installation documents enclosed in this kit.
If this help file is not in the directory, follow the instructions on pages 1
to 8 in the CTA 150
i Installation Guide to install the CTA 150i.
1-800-4 NORTEL
http: / / www.nortelnetworks.com/norstar
Norstar is a trademark of Northern Telecom.
Norstar est une marque de commerce de Northern Telecom.
Norstar es una marca registrada de Northern Telecom.
P0890651 02
Printed in Canada / Imprimé au Canada / Impreso en Canadá