Ttl auto flash, Mode – Nikon SB-28 User Manual

Page 34

Advertising
background image

4

Select the flash mode.

—Press the

µ button until t appears on the LCD panel.

• Set your camera to the Matrix

Balanced Fill Flash or Center-
Weighted Fill-Flash/Spot Fill-Flash
mode.

5

Check the shooting distance.

A flash shooting distance range
of 0.8 to 6m (2.6 to 20 ft) is shown.

Nikkor lenses with a built-in CPU

• In any exposure mode:

—Press the

{ or } button until the same aperture as displayed on the

camera’s LCD panel or in viewfinder is set on the SB-28’s LCD panel, then
confirm the flash shooting distance range.

Nikkor lenses without a built-in CPU

• In Aperture-priority auto (A) or Manual (M) mode only:

—Press the

{ or } button until the same aperture on the lens is set on the

SB-28’s LCD panel, then confirm the flash shooting distance range.

6

Wait for the ready-light to come on and make sure the subject

is in focus before taking the picture.

• If the ready-light blinks for approx. 3

seconds after shooting, this indicates
the light may have been insufficient
for correct exposure. In this case,
use a wider aperture or move closer
to the subject.

34

TTL Auto Flash

t

t

Mode

Flash settings

For cameras in Group III: F-601/N6006, F-601

M

/N6000

Advertising