Nikon SB-28 - Manual (Page 64)

64
Close-up flash operation in TTL Auto Flash
t Mode
7 Move the SB-28 off axis, making sure the subject will
receive sufficient illumination.
• In 3D Multi-Sensor Balanced Fill-Flash mode with cameras in Group I, you
may not be able to obtain correct exposure because distance information
from the lens (D-type Nikkor) is used. In this case, position the camera
and SB-28 at equal distances from the subject.
8 Wait for the ready-light to come on and make sure the subject
is in focus before taking the picture.
• If the ready-light blinks for approx. 3 seconds after shooting, this indicates
the light may have been insufficient for correct exposure. In this case, use
a wider aperture or move closer to the subject.
• Correct exposure cannot be obtained if the subject is predominantly black
or white or contains a highly reflective surface. In that case, make
exposure compensation according to the shooting conditions.
(See pages 71-75, Exposure compensation in flash photography,
to ensure correct exposure.)