Nortel Networks FastRad - Manual (Page 13)

3
FastRAD Installation Guide
Before you
start ❑ Make sure you read and follow the instructions in this
guide.
❑ Make sure you have the necessary tools to complete the
installation. A Special parts check list is provided in this
guide.
❑ Make sure all equipment in the FastRAD package is
accounted for. A Package check list is provided in this
guide.
❑ Make sure the necessary environment and electrical con-
ditions are met. An Environment check list and list of
Electrical requirements are provided in this guide.
Important : Only one FastRAD can be connected to a KSU.
Environment
check list The FastRAD installation area should be:
❑ clean, free of dust, dry and well ventilated
❑ between 0
°
and 50
°
Celsius (32
°
to 122
°
Fahrenheit)
❑ non-condensing relative humidity between 5% and 95%
❑ within 800 m (2600 feet) of the Norstar KSU
Note : When using a Norstar 3X8 KSU the FastRAD must be
installed within 305 m (1000 feet).
❑ free of Bridge taps on the FastRAD KSU TCM loop
❑ free of Loading coils on the FastRAD KSU TCM loop
Package check
list Make sure the package contains:
❑ the Norstar FastRAD
❑ an RJ-11 teladapt cord
❑ a power supply with a barrel connector
❑ a paper template (for mounting)
855601 Book : 855601 Guide Page 3 Wednesday, October 29, 1997 4:06 PM