Novatel SUPERSTAR II OM-20000077 - Manual (Page 19)

SUPERSTAR II User Manual Rev 3 19
Chapter 3 Installation
This section covers the installation of the receiver.
NovAtel’s StarView graphical user interface software running on a PC allows you to control the receiver and to
display its outputs. See Section B.3, StarView Software Installation starting on Page 55 for its installation
instructions. Details on the StarView program are provided in Reference [5] on Page 13.
The SUPERSTAR II is an OEM product designed for flexibility of integration and configuration. You are free
to select an appropriate data and signal interface, power supply system and mounting structure. This allows you
to custom-design your own GPS-based positioning system around the SUPERSTAR II.
A typical system configuration is shown in Figure 4:
Figure 4: Typical System Configuration
Reference Description
1 J2 to user-supplied GPS antenna
2 J2
3 User-supplied enclosure
4 User-supplied power, data and signal connector to J1
5 User-supplied interface
6 J1
7 COM1, COM2 and power connectors
2
6
4
5
1
3
7