NEC MH4500 - Manual (Page 142)

B-10 System Setup Utility
Recommended Resource Settings
System Group Normal Setting Your Configuration
System Identification and Version
Information
SSU Configuration File Version Display Only
MP Spec. Version V 1.4
Processor Speed Setting 3.5 X Bus Speed
Memory Subsystem Group
Extended Memory Options Use BIOS Setup Utility
On-Board Disk Controller Group
On-board Floppy Controller Enable
On-board IDE Controller Enable Primary Channel
On-Board Communications Device
Group
Serial Port 1 Configuration 3F8h – IRQ4
Serial Port 2 Configuration 2F8h – IRQ3
Parallel Port Configuration 378h – IRQ7
Parallel Port Mode Extended Capabilities,
Port DMA 1
Floppy Drives Group
Floppy Drive A Option 3.5 1.44/1.25 MB Drive
Floppy Drive B Option Disabled or not installed
IDE Devices Group
IDE 32-Bit I/O Disable
Keyboard Group
Numlock Off
Key Click Disable
Typematic Speed 30CPS
Typematic Delay 500 MS Delay
SCSI ROM BIOS Group
Embedded SCSI Devices Option Enable
ROM Scan