NEC MH4500 - Manual (Page 63)

Configuring Your System 3-19
SCSI Hard Disk Drives
Your Configuration
Descriptions
Recommended Settings or
Display Only
0 1 2 3 4 5
Device Selections Press Enter for menu. Select
device and press Enter.
Sync Rate 40
Width (bits) 16
Disconnect On
Read/Write I/O
timeout (sec) 10
Scan for device at
boot time Yes
Scan for SCSI
LUNS No
Queue Tags On
SCSI Removable Media Devices
Your Configuration
Descriptions
Recommended Settings or
Display Only
Dev 0 Dev 1 Dev 2 Dev 3
Device Selections Press Enter for menu. Select
device and press Enter.
Sync Rate 10
Width (bits) 8
Disconnect On
Read/Write I/O
timeout (sec) 10
Scan for device at
boot time Yes
Scan for SCSI
LUNS No
Queue Tags On
3. Highlight the function you want to change and press Enter . You are
prompted to save changes when you exit the configuration utility.
Note: If you wish to format a disk or verify disk media,
select “Format” or “Verify” from the Device Setup menu.