NEC MH4500 User Manual
Page 62
3-18 Configuring Your System
Adapter Setup Screen
Description
Recommended Setting or Display Only
Your Configuration
SCAM Support
On
Parity
On
Host SCSI ID
7
Scan Order
Low to High
Removable Media
Support
None
CHS Mapping
SCSI Plug and Play Mapping
Spinup Delay (sec)
2
Help
Restore Default Setup
Exit This Menu
3.
Highlight the function you want to change and press
Enter
. You are
prompted to save changes when you exit the configuration utility.
To change device configuration parameters, perform the following steps.
1.
At the SCSI Configuration Utility Menu, select “Device Selections” and
press
Enter
. The Devices 0 to 7 screen displays.
2.
Select the SCSI device you are reconfiguring and press
Enter
.
T
If you are configuring SCSI Hard Disk Drives, see the following "SCSI
Hard Disk Drives" table.
T
If you are configuring SCSI Removable Media Devices, see the
following "SCSI Removable Media Devices" table for recommended
settings.