Nikon Coolpix L24 - Manual (Page 105)

93
Basic Camera Setup: The Setup Menu
Sh
oot
in
g, P
laybac
k an
d Se
tu
p Me
nus
w Electronic VR
Choose whether to use electronic VR (vibration reduction) when taking still
pictures.
When Auto is selected, R appears on the monitor (
A 6), and electronic VR is
applied depending on shooting conditions.
Press the d button M z (Setup menu) (A 83) M w Electronic VR
Auto
When all of the following conditions are met while taking still pictures, electronic VR
is applied and the effects of camera shake are reduced.
• The flash is turned off or set to slow sync mode.
• The shutter speed is slow.
• The Continuous setting is set to Single.
• When the subject is dark.
Off (default setting)
Electronic VR is disabled.
B
Notes on Electronic Vibration Reduction
• Electronic VR is disabled while the flash is used, except when using slow sync mode. Note that
Electronic VR is disabled even when flash mode is slow sync with red-eye reduction ( A 35, 36).
• If the exposure period exceeds a certain period of time, Electronic VR will not function.
• Electronic VR cannot be used when using the following scene modes.
- Sports ( A 35)
- Night portrait ( A 35)
- Dusk/dawn ( A 37)
- Night landscape ( A 37)
- Museum ( A 38)
- Fireworks show ( A 39)
- Backlight ( A 39)
• The effectiveness of Electronic VR decreases as camera shake increases.
• Pictures taken using motion detection may be somewhat grainy.