NETGEAR DG814 DSL - Manual (Page 18)

Reference Manual for the Model DG814 DSL Modem Internet Gateway
1-2 Introduction
– Blocking can be scheduled by day and time
– Network Address Translation (NAT) hides local PCs from the Internet
– Incoming port forwarding and DMZ for specific services
• Built in 4-port 10/100 Mbps Switch
– Allows LAN connections at 10 megabits per second (Mbps) or 100 Mbps
– Autosensing for Ethernet (10BASE-T) or Fast Ethernet (100BASE-Tx) transmissions
– Half-duplex or full-duplex operation
• Direct connection to the wide area network (WAN) using the built-in ADSL modem
• Protocol Support
– IP routing
– Network Address Translation (NAT) for operation with a single static or dynamic IP
address
– Dynamic Host Configuration Protocol (DHCP) server for dynamically assigning
network configuration information to PCs on the LAN
– DHCP client for dynamically obtaining configuration information from the Internet
Service Provider (ISP)
– DNS Proxy for simplified configuration
– PPP over Ethernet (PPPoE) support
– PPP over ATM (PPPoA) support
– Classical IP support
• Login capability
Automatically executes user login for:
– Automatically executes user login for PPP over Ethernet or PPP over ATM accounts
• Easy, web-based setup for configuration
• Front panel LEDs for easy monitoring of status and activity
• Flash memory for firmware upgrade
• Free technical support seven days a week, twenty-four hours a day