NETGEAR DG814 DSL - Manual (Page 67)

Reference Manual for the Model DG814 DSL Modem Internet Gateway
Maintenance 6-9
Gateway Upgrade
The routing software of the Model DG814 gateway is stored in FLASH memory, and can be
upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from
Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary
(.BIN) file before sending it to the gateway. The upgrade file can be sent to the gateway using your
browser.
Note: The Web browser used to upload new firmware into the Model DG814 gateway must
support HTTP uploads. NETGEAR recommends using Microsoft Internet Explorer or Netscape
Navigator 3.0 or above.
From the Main Menu of the browser interface, under the Maintenance heading, select the Gateway
Upgrade heading to display the menu shown in
Figure 6-8 .
Figure 6-8. Gateway Upgrade menu
To upload new firmware:
1. Download and unzip the new software file from NETGEAR.
2. In the Gateway Upgrade menu, click the Browse button and browse to the location of the
binary (.BIN) upgrade file
3. Click Upload.
Note: When uploading software to the Model DG814 gateway, it is important not to interrupt
the Web browser by closing the window, clicking a link, or loading a new page. If the browser
is interrupted, it may corrupt the software. When the upload is complete, your gateway will
automatically restart. The upgrade process will typically take about one minute.
In some cases, you may need to reconfigure the gateway after upgrading.