NorthStar Navigation GM1708 961XD User Manual
Page 44
SECTION TWO - Installation
Page 34
961 INSTALLATION MANUAL Revision A
DISPLAY (cont’d)
The display screen dims, either slightly or 
more, after the unit has been on for a cer-
tain time.
If the display screen dims and also displays 
the error message “unit too hot, backlighting 
dimmed.”
•
The unit may be implementing its 
auto-dimming mode, which occurs 
when no keys have been pressed for 
an hour or more (pressing any key 
restores the previous brightness 
level). When this occurs the display 
screen dims to about half its normal 
brightness (based on its current 
brightness). Auto-dimming helps 
maintain the integrity of the display 
and reduce power consumption when 
the unit is on for many hours at a time.
•
The unit may be running too hot 
based on its current environment. In 
this case, the display screen dims 
only about or notch or so, which is 
normal.
•
There are two covered external fans 
at the back of the control head. When 
one or both of these fans needs ser-
vicing, the 961’s backlighting dims 
substantially to reduce the unit’s over-
all temperature. These fans are 
dealer-serviceable; call your Northstar 
dealer.
PROCESSOR
System lock-ups
Software-related:
System locks up under certain conditions, 
such as when configuring screens, routes, 
or waypoints. This maybe followed by a col-
ored screen indicating that you may want to 
call the Northstar Service Department to 
report an EIP (software) error.
•
Install the latest software upgrade (to 
order, call the Northstar Service 
Department).
Table 2: Troubleshooting the installation (continued)
Problem Area
Symptom
Possible Solutions/Reasons