NETGEAR FA511 User Manual

Page 2

Advertising

4. Click “Next” to continue.

5. Insert the Windows 98 CD-ROM and click “OK”.

6. Make sure drive D (or the appropriate CD-ROM drive letter) and Win98 appear in the “Copy files

from:” prompt line (example, D:\WIN98), and then click “OK”.

7. Click “Finish”.

8. Remove the Windows 98 CD-ROM from the CD-ROM drive, and then click “Yes” to reboot.

The Model FA511 CardBus Adapter driver installation for Windows 98 is now complete.

To verify your installation:

1. Double-click “My Computer” on the desktop, double-click “Control Panel” and then

double-click “System”.

2. Click “Hardware” and click “Device Manager” tab, and then double-click “Network adapters”.

Install the Windows 2000 Network Driver

Note: If the “Insert Disk” window opens and a message prompts you to insert your Windows
CD-ROM at any time during the installation process, insert the Windows CD-ROM in Drive D (the
CD-ROM drive) and click on “OK”. Then follow the next step in the instructions.

1. A Found New Hardware Wizard dialog box will appear, indicating that Windows 2000 has found the

adapter. Insert the GearBox™ for Adapters CD into your CD-ROM drive.

2. Click “Next”.

3. The install hardware device drivers dialog box will appear. Select “Search for a suitable driver for

your device (Recommended)”. Click “Next”.

4. The Locate Driver Files dialog box will appear. Select “CD-ROM drives”. Click “Next”.

5. The Driver File Search Results dialog box will appear. Click “Next”.

6. Digital Signature Not Found dialog box may appear. Click “Yes”.

7. The completing the Found New Hardware Wizard dialog box appears with the following adapter name

: Netgear FA511 CardBus Mobile Adapter. Click “Finish”.

8. Remove the GearBox™ for Adapters CD from the CD-ROM drive.

The Model FA511 CardBus Adapter driver installation for Windows 2000 is now complete.

Install the Windows Me Network Driver

Note: If the “Insert Disk” window opens and a message prompts you to insert your Windows CD-
ROM at any time during the installation process, insert the Windows CD-ROM in Drive D (the CD-
ROM drive) and click on “OK”. Then follow the next step in the instructions.

1. Windows Me will automatically detect the new FA511 CardBus Adapter hawdware. Insert the

GearBox™ for Adapters CD into your CD-ROM drive.

2. When the following dialog box opens, select “Automatic search for a better driver (Recommended)”.

Click “Next”.

3. The driver is copied onto your system. The next Windows appears with the following adapter name:

NETGEAR FA511 CardBus Mobile Adapter. Click “Finish”.

4. Once the driver is installed, Windows Me will ask if you want to restart your PC. Remove the

GearBox™ for Adapters CD from the CD-ROM drive and click “Yes” to reboot.

The Model FA511 CardBus Adapter driver installation for Windows Me is now complete.

Install the Windows 98 Network Driver

1. Windows 98 will automatically detect the new FA511 CardBus Adapter hardware. Insert the

GearBox™ for Adapters CD into your CD-ROM drive”.

Click “Next”.

2. Select “Search for the best driver for your device (Recommended)” and then click “Next”.

3. When the next dialog box opens, check the “CD-ROM drive”, then click “Next”.

4 TEST YOUR NETWORK CONNECTION

Trademarks

NETGEAR

is a registered trademark of NETGEAR, INC. Windows

is a registered trademark of

Microsoft Corporation. Other brand and product names are trademarks or registered trademarks of
their respective holders. Information is subject to change without notice. All rights reserved.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves
the right to make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s)
or circuit layout(s) described herein.

Certificate of the Manufacturer/Importer

It is hereby certified that the Model FA511 CardBus Notebook Adapter has been suppressed in
accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The
operation of some equipment (for example, test transmitters) in accordance with the regulations may,
however, be subject to certain restrictions. Please refer to the notes in the operating instructions.

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on
the market and has been granted the right to test the series for compliance with the regulations.

VCCI Statement

This equipment is in the Class B category (information equipment to be used in a residential area
or an adjacent area thereto) and conforms to the standards set by the Voluntary Control Council for
Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing radio
interference in such residential areas.

When used near a radio or TV receiver, it may become the cause of radio interference.

Read instructions for correct handling.

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired

operation.

Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures: (1) Reorient or relocate the receiving antenna, (2) Increase the separation between the
equipment and receiver, (3) Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected, (4) Consult the dealer or an experienced radio/TV technician
for help.

EN 55 022 Statement

This is to certify that the Model FA511 CardBus Notebook Adapter is shielded against the generation of
radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a.
Conformity is declared by the application of EN 55 022 Class B (CISPR 22).

Compliance is dependent upon the use of shielded data cables.

Canadian Department of Communications Radio Interference Regulations

This digital apparatus (Model FA511 CardBus Notebook Adapter) does not exceed the Class B limits
for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.

Règlement sur le brouillage radioélectrique du ministère des Communications

Cet appareil numérique (Model FA511 CardBus Notebook Adapter) respecte les limites de bruits
radioélectriques visant les appareils numériques de classe B prescrites dans le Règlement sur le
brouillage radioélectrique du ministère des Communications du Canada.

Declaration of Conformity

NETGEAR Model FA511 CardBus Notebook

Adapter

FOR HOME OR OFFICE USE

Tested to comply
with FCC Standards

3. Double-click “NETGEAR FA511 CardBus Notebook Adapter”. A message will appear describing

the status of the device.

If there is a problem with the installation of the driver, an exclamation point will appear next to
the “NETGEAR FA511 CardBus Mobile Adapter”. Try rebooting your computer. If the problem
persists, call 1-888-NETGEAR for free technical support.

With NETGEAR PC cards, your notebook PC becomes compatible with 10 Mbps Ethernet and
your migration to 100 Mbps is built in with 10/100 dual-speed technology. Now you’re ready to
share files and peripherals at either 10 Mbps or 100 Mbps. And help is there when you need it!
NETGEAR provides free, 24x7 technical support in English, with selected local language
support during office hours.

Copying Files. . .

The file ‘choosusr.dll’ on Windows 98
Second Edition CD-ROM cannot be found

Insert Windows 98 Second Edition CD-ROM
in the selected drive, and click OK.

D:\WIN98

Cancel

Details. . .

—

Skip File

—

Copy files from:

—

Insert Disk

Please insert the disk labeled ‘Windows 98 Second Edition
CD-ROM’, and then click OK.

5 ENJOY BEING CONNECTED!

Advertising

Popular Brands

Popular manuals