Navman iCN 520 - Manual (Page 57)

57
iCN 500 Series | User Manual
Alerts Preferences - Speed and GPS Signals
The Safety settings allow you to set safety-related warnings.
1. From the Preferences menu, tap Safety Alerts.
The Safety Alerts screen will display.
2. On the Safety Alerts screen, tap Safety.
The Safety screen will display.
3. Complete the following:
If you want to... Then...
enable a warning chime
when traveling at or above a
designated speed select the speed in the Speed box by tapping the left
or right arrows or using the left and right sides of the
4-way toggle. Tap Save.
The Safety alerts screen will display.
Note: The GPS signal alert will be activated when a
Speed alert is selected.
enable a visual warning if the
Main Menu screen is accessed
in a moving vehicle select the Warn driver when operating check box.
enable a warning chime and
visual warning when the GPS
signal has been lost select the Warn when GPS lost check box.
Note: The GPS signal alert will be activated when a
Speed alert is selected.
4. Tap Save.
The Main Menu screen will display.