Navman iCN 520 - Manual (Page 65)

65
iCN 500 Series | User Manual
5. If prompted to connect your iCN to your computer, complete the following:
• Plug the large end of the USB cable directly into a USB port on your computer (not a USB
hub); plug the small end into the USB Socket on the bottom of your iCN.
• Plug the small end of the AC Power Pack cable into the Power Socket on the bottom of your
iCN; plug the other end into the mains.
• Press .
The iCN will turn on.
• When the following screen displays on your iCN, click Next.
• Microsoft ActiveSync will synchronise with your iCN.
You are now ready to install maps to your iCN.
To Open Smart Desktop
Once Smart Desktop has been installed, you can access it from the Start menu:
Start  Programs  Navman  Smart Desktop 2005 for iCN500 series
Uninstalling Smart Desktop from your
Computer
We recommend that you use the Add or Remove Programs feature in your Windows Control Panel:
1. Open Add or Remove Programs:
Start  Control Panel  Add or Remove Programs
2. Uninstall:
Navman SmartST Desktop 2005 for iCN500 Series.
Note: The name of the program may vary from the above.
Smart Desktop has now been uninstalled from your computer.