Napco Security Technologies GEM-K2AS User Manual
Page 17
17
F U N C T I O N M E N U
The keypad can provide access to a wide assortment of utility functions. The functions are displayed in a prompting
“YES/NO” format. While the messages are shown here in their entirety, actual displays will scroll automatically in two
screens. Wait for the entire message to display. To recall an alternate screen, hold down the blue
G
Button. To
skip a function, answer
NO
(press
Q
); to select and execute a function, answer YES (press
P
) or
U
. The com-
plete function list is provided here in its normal displayed sequence. However, since not all functions are designed for all
systems (or intended for all users), only functions that are applicable and active are displayed. (For example, if no zones
are bypassed, "Disp Bypass" (Display Zones Bypassed) will not appear). In addition, functions that are intended for use
by the installer or servicer will not be displayed. (Note: Functions may be manually scrolled forward or backward using
R
and
B
, respectively).
Display Zone Status?
Identifies zones that are not secured. Zones identified will auto-
scroll through the display window, Press NEXT(
P
) and PRIOR (
Q
) to scroll
bypassed zones.
Display Zones Bypassed?
Displays manually bypassed zones. Zones identified will
auto-scroll through the display window. Press NEXT(
P
) and PRIOR (
Q
) to scroll
bypassed zones.
Display Zone Directory?
Displays each zone by number and description. Zones identi-
fied will auto-scroll through the display window. Press NEXT(
P
) and PRIOR (
Q
)
to scroll bypassed zones.
Activate Bell Test?
Activates the alarm (while disarmed) for about 2 seconds. If the
alarm does not sound, call for service.
A C O N
D s p Z n / S t a t u s /
Y e s / N o
B Y P A S S E D
A C O N
D s p / B y p a s s /
Y e s / N o
A C O N
D s p Z n / D i r /
Y e s / N o
A C O N
B e l l / T e s t /
Y e s / N o