Niles Audio RCA-TT - Manual (Page 11)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI
9
Figure 7: Locating IR Sensor Additional Sensors
Additional
Flashers
REMOTE CONTROL ANYWHERE! KIT
CONNECTION HUB
1 2 3
Red
Bare
Black
Additional Sensors
Additional
Flashers
REMOTE CONTROL ANYWHERE! KIT
CONNECTION HUB
1 2 3
Red
Bare
Black
INSTALLATION
(CONTINUED)
STEP 6 – MOUNTING THE CONNECTION HUB
Make sure that your system tested OK before proceeding.
Once you have decided on the ideal location for the connection hub, unplug the 12VDC power
supply from the electrical outlet and disconnect the sensor and the MicroFlasher cables from the
connection hub (
Figure 8). Also remove the connector from the table-top sensor (Figure 9).
The connection hub can be either mounted on a wall using screws or placed on a shelf using the
included adhesive feet (
Figure 10).
Figure 8: Removing Cables