Niles Audio RCA-TT - Manual (Page 13)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI
11
INSTALLATION
(CONTINUED)
STEP 7 – RUNNING THE SENSOR CABLE
Conceal the sensor cable between the table-top sensor and the connection hub. For specific
information refer to “Running Sensor Cable in New Construction” or “Concealing Sensor Cable in
Existing Walls”. If you need to cut and restrip the wire, make sure that only 1/4” of wire is exposed.
Exposing too much wire could create “shorts” within the system.
IMPORTANT: IF YOU HAVE DOUBTS ABOUT WHETHER YOU ARE CAPABLE OF INSTALLING A NILES RCA-TT
REMOTE CONTROL ANYWHERE! KIT IN YOUR WALLS, CONSULT A NILES DEALER OR PROFESSIONAL INSTALLER.
THEY HAVE SPECIAL TOOLS, TECHNIQUES, AND EXPERIENCE TO MAKE THE IMPOSSIBLE POSSIBLE. THE
INSTALLER CAN PROVIDE YOU WITH AN ESTIMATE BEFORE ANY WORK IS DONE.
Additional Sensors
Additional
Flashers
REMOTE CONTROL ANYWHERE! KIT
CONNECTION HUB
1 2 3
Red
Bare
Black
Figure 11: Connecting Power Supply and Flashers