Viewing a list of attached devices, Managing the configuration file, Viewing a list of attached devices -7 – NETGEAR N300 ROUTER WNR2000 User Manual
Page 113: Managing the configuration file -7, Managing the configuration, Managing the configuration file” in chapter 6
NETGEAR Wireless-N 300 Router WNR2000 User Manual
Using Network Monitoring Tools
6-7
v1.3, July 2009
Viewing a List of Attached Devices
The Attached Devices screen contains a table of all IP devices that the router has discovered on the
local network. Select Attached Devices under Maintenance in the main menu to view the table.
For each device, the table shows the IP address, NetBIOS host name or device name (if available),
and the Ethernet MAC address. To force the router to look for attached devices, click Refresh.
Managing the Configuration File
The configuration settings of the WNR2000 router are stored within the router in a configuration
file. You can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.
Figure 6-4
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.