NETGEAR N300 ROUTER WNR2000 - Manual (Page 26)

NETGEAR Wireless-N 300 Router WNR2000 User Manual
1-10 Configuring Basic Connectivity
v1.3, July 2009
•
Telstra Bigpond, an Australian residential cable modem service
•
Other, which selects PPPoE (Point to Point Protocol over Ethernet), the protocol used
by most DSL services worldwide.
–
Login and Password. This is the user name and password provided by your ISP. This
name and password are used to log in to the ISP server.
–
Service Name. If your connection is capable of connecting to multiple Internet services,
this setting specifies which service to use.
•
Connection Mode. This drop-down list selects when the router will connect to and
disconnect from the Internet.
Note: The Telstra Bigpond setting is only for older cable modem service
accounts still requiring a Bigpond login utility. Telstra has
discontinued this type of account. Those with Telstra DSL accounts
and newer cable modem accounts should select No for Does Your
Internet Connection Require a Login.
Figure 1-8
Note: Not all ISPs are listed here. The ones on this list have special
requirements.
Figure 1-9