Network Technologies SM-8X4-HDA User Manual
Page 31
NTI AUDIO/HD VIDEO MATRIX SWITCH
27
Output Names
From the Administration menu, the Video or Audio Output
Names page can be displayed. (Selected separately from
the menu.) These pages enable the Administrator to
change the names of the output ports displayed on the
Switch page. To change an Output Name, enter the
name of the port for the desired output port number, and
press "Save".
Figure 15- Web interface Output Names page
Outputs Scanning Sequences
Figure 16- Web interface Scan Mode page
The Outputs Scanning Sequences page displays the configuration of an automatic switching sequence from input (video source)
to input for each output (monitor).
The page displays:
output number being configured
the Scanning Sequence function status for that output
the Scan Mode status of each input (ON/OFF)
the length of time in seconds (dwell time) that each input will be viewed when connected
Note: Only the changes to the port
directly to the left of the Save button will
be saved. All other changes to ports
without pressing the port's respective
Save button will be discarded. All port
names must be no more than 16
characters in length and only
alphanumeric characters may be used.