Network Technologies SM-8X4-HDA - Manual (Page 45)

NTI AUDIO/HD VIDEO MATRIX SWITCH
41
SPECIFICATIONS
DESCRIPTION SPECIFICATION
Video
Video Connectors BNC
Maximum Resolution 1920X1080@ 60Hz
Supported Signals Component video, S-video, Composite video
Input/Output Impedance 75 ohm
Maximum Input / Output Levels 1.7Vp-p, no DC offset
Gain Unity
DC offset (output)
+/- 15mV; no input offset
Bandwidth 160MHz)
Stereo Audio
Signal Type Stereo Audio, analog, left / right
Connectors (Unbalanced) RCA: Red = Right; White = Left; or BNC (customer defined)
Connectors (Balanced) Detachable Screw Terminals
Maximum Input Level 2.5Vp-p
Input Impedance 10K ohms
Output Impedance 50 ohms
Frequency Response +0.15/-1.65dB; 20Hz – 20kHz
THD +N 0.15% @ 1kHz
S/N 90dB
Stereo Channel Separation
-80dB
Output Gain -80dB to 10dB
Digital Audio
Signal Type S/PDIF
Connectors RCA (Orange); or BNC (customer defined)
Input Impedance 75 ohms
Output Impedance 75 ohms
Resolution 16 to 24 bit
Sampling Rate 32 to 96 kHz
RS232 Control
RS232 Connector DB9 female, 1200-9600 bps
Supported Signals Tx, Rx; RTS wired to CTS; DTR wired to DSR and CD
Flow Control None
Parity None
Handshaking None
Ethernet Control
Ethernet Connector RJ45 female
Connection Speed 10 / 100 Mbps; half-duplex and full-duplex support
Security SSL
Supported Protocols Http, https, telnet
General Specifications
Available Sizes 8x4, 8x2, 4x4, 4x2
Power 110~240VAC; 50 or 60Hz
Power Connector IEC Female
Fuse protection 2A 240VAC Fast-blo
Operating Temperature 10° - 40° C
Enclosure Type Metal, Rack, 2RU
Enclosure Dimensions 19”x10”x3.5”
Standard Case 2RU Rack Mount
Compliance Certifications
CE Mark Complies with EN55022
ESD Protection Complies with EN61000-4-2 Specification
UL UL Listed E238791
FCC Part 15