3g wireless router, Ethernet installation, Mac quick start guide – NetComm 3G WIRELESS ROUTER N3G001W User Manual
Page 2
3G Wireless Router
Mac Quick Start Guide
Step 1 – Install the Hardware
To connect your N3G001W using the Ethernet cable, follow these step-by-step instructions:
>
Connect the Ethernet cable.
Connect one end of the Ethernet cable provided to the Ethernet port on your Mac and the
other end of the cable to the Ethernet port of your N3G001W.
>
Insert your 3G PC Card
Carefully insert the 3G card into the N3G001W slot until it is firmly fitted.
>
Attach the power connector.
Connect the AC power adapter to the Power connector on the back of the N3G001W and
plug in the adapter into a wall outlet or power strip.
>
Switch on the power.
Your N3G001W will start up. Turn on your Mac.
Step 2 – Set up your Mac
This is how to configure your N3G001W to work with the Mac OS X (10.5.4 Leopard)
1.
From the Apple menu, select System Preferences.
Ethernet
Installation