Nikon UPS - Manual (Page 26)

UPS/400
. . . an IBM AS/400 UPS power monitoring system . . .
26
T
O
M
AKE
UPS/400 P
ERMANENT
To make UPS/400 permanent, the user should complete and return the AS/Manager License agreement to
PBS. Based on your CPU serial number(s), PBS product support will issue a permanent security
number(s). To install this permanent security number, please do the following:
1. Start
UPS/400 by keying in STRUPS400 and press Enter.
2. Key in UPDUPSSYSV on the command line and press Enter.
3. Input the 7 digit permanent security number supplied by PBS product support in the entry field
and press Enter. The user will get a message indicating that the product has been made
permanent.
If questions arise during this process, call PBS product support at (918) 587-1500.