Nikon UPS - Manual (Page 5)

UPS/400
. . . an IBM AS/400 UPS power monitoring system . . .
5
Internet Download Installation
1. At the AS/400 command prompt, type: CRTLIB UPSTRIAL, then: CRTSAVF
UPSTRIAL/UPSTRIAL
2. Go to the Pinnacle website at http://www.pbsnow.com, go to “Products.” Go to
“UPS/400” and click on “Download your 30-day free trial” at the bottom of the page.
You will be asked to register before download. Follow the instructions for download.
3. After downloading, open a DOS session on the PC and at the prompt type: cd/[name
of directory where you downloaded the
4. Then type: FTP [name of your AS/400 or its TCP/IP address]
5. Type your AS/400 user profile and press enter. Type your password and press Enter.
6. Type: bin
7. Type: put UPSTRIAL.SAV UPSTRIAL/UPSTRIAL.SAVF
8. Type: quit and press enter, then: exit and press enter
9. Back at the AS/400 command prompt, type:
RSTOBJ OBJ(*ALL) SAVLIB(UPSTRIAL) DEV(*SAVF) SAVF(UPSTRIAL/UPSTRIAL)
10. You should receive a message indicating that five objects were restored.
Note: You may see a security message. Don’t be alarmed.
11. Type: CALL UPSTRIAL/UPSINST
12. To start UPS/400, type STRUPS400 or GO UPSMON on a command line.
You will be presented with the option to specify UPS/400 Autostart features at this time. A prompt will
be displayed, asking if you wish to use the UPS/400 Autostart Job:
“___ Install the UPS/400 modified System Startup Program (Y/N).”
A response of Y will change the system value QSTRUPPGM to point to Program QSTRUP in UPS400.
This will allow UPS/400 to restart after IPLs. A response of N will cause no changes to be made to the
IBM supplied startup program. You may elect to use the UPS/400 Autostart Job at any time by pressing
F10 while on the UPS/400 System Attributes screen or you can include the supplied source code
(UPS400/UPSSRC member QSTRUP) in your own start-up program.
NOTE: UPS/400 program fixes can be applied by the customer through Automated Customer Support
(ACS) which has been supplied to you on your UPS/400 installation media. This feature permits online
scanning and downloading of appropriate PTFs by the user through access to PBS’s host AS/400. See the
Remote Customer Support section at the back of this manual for instruction on how to install and use this
feature.