Nintendo DSi XL - Manual (Page 43)

83
Applic
ations & S
ettings
84
Applic
ations & S
ettings
If the connection test is successful, settings are complete.
Immediately after completing settings using WPS, connection may fail due to the
restarting of the access point. Wait a short time, then try performing a connection test again.
Tap the connection type best suited for your
access point
Access point steps
Push-Button Connection PIN connection
Continue to push the WPS Button
until the lamp blinks Set the PIN number displayed on the
Nintendo DSi XL screen in your access point
It may take as long as 2 minutes until setup completes.
Tap Next
Tap OK to perform a connection test
Internet Setup (cont.)
Advanced Setup
(See glossary, page 109, for definition of terms)
Advanced Setup allows settings for connecting to the Internet using WPA security, proxy settings and
settings for connecting with WPS.
Advanced Setup (connections 4 – 6) cannot be used with DS-exclusive software. When connecting to the
Internet with DS-exclusive software, configure normal Internet settings (connections 1 – 3).
How to Connect
Tap Connection Settings
Tap Advanced Setup
Tap a connection labeled None
Tap the connection method best-suited for your
connection environment
• To set up using WPS:
Tap the WPS icon and proceed to step .
• Search for an Access Point (see page 79).
• Manual Setup *The following instructions are the same as for configuring normal
settings (see page 81).