NorthStar Navigation Northstar 2 kW User Manual
Page 25
Northstar 2 kW Radar Installation Manual
25
4.3
Run the 2 kW interconnection cable (NS003100/NS003101) to the
radar processor
Run the 2 kW interconnection cable (NS003100/NS003101) from the scanner to the radar processor.
Push the round connector (A) of the 2 kW interconnection cable into the scanner connection on the
radar processor and tighten the locking nut.
The interconnection cable pin details are provided here for information, in case the connector needs
to be removed to feed the cable, or in case the cable needs to be shortened.
The front view of the 2 kW interconnection cable is shown above.
2 kW interconnection cable pin details
Pin
Color
Signal name
AWG size
1 Green
(big) Power #12
2
Yellow (big)
Power GND
#12
3
Green (thin)
Pulse width
#24
4
Clear Coax signal
Video
#24
5
Drain wire for 4
Video GND
#24
6
Drain wire for 7
Trig GND
#24
7 Black
Coax
signal
Trig/STC #24
8
White
BZ Tune to
scanner
#24
9 Yellow
Tune
from
scanner
#24
10
White (big)
No connection
#12
Shell Braid
shield