Network Technologies SM-nXm-AV-LCD - Manual (Page 14)

11
RO - VIDEO Read Connection For Output/User Port
Format:
RO SW,OP<CR>
Successful Response:
*<CR>
IP<CR>
Syntax or Transmission Error:
?<CR>
Behavior:
This will find out which VIDEO input/CPU port is connected to the specified VIDEO output/user port.
AS - AUDIO Connect One Output/User Port To Input/CPU Port
Format:
AS SW,IP,OP<CR>
Successful Response:
*<CR>
Syntax or Transmission Error:
?<CR>
Behavior:
This will connect a single AUDIO output/user port to a single AUDIO input/CPU port.
AA - AUDIO Connect All Outputs/Users Ports To Input/CPU Port
Format:
AA SW,IP<CR>
Successful Response:
*<CR>
Syntax or Transmission Error:
?<CR>
Behavior:
This will connect all of the AUDIO output/user ports on the switch to a single AUDIO input/CPU port.
AO - AUDIO Read Connection For Output/User Port
Format:
AO SW,OP<CR>
Successful Response:
*<CR>
IP<CR>
Syntax or Transmission Error:
?<CR>
Behavior:
This will find out which AUDIO input/CPU port is connected to the specified AUDIO output/user port.
AM - Set Mute State For Output/User Port
Format:
AM SW,OP,MU<CR>
Successful Response:
*<CR>
Syntax or Transmission Error:
?<CR>
Behavior:
This command will set the mute state for the specified AUDIO output/user port. The mute state is either 00 or 01, with 00
being UNMUTE and 01 being MUTE.