Netopia 3347W - Manual (Page 18)

4-6 Getting Started Guide
Then go to Step 2.
Step 2. Select Obtain an IP address automatically .
Step 3. Select Obtain DNS ser ver address automatically , if available.
Step 4. Remove any previously configured Gateways, if available.
Step 5. OK the settings. Restar t if prompted.
NOTE: You can also use these instructions to configure other computers on your network to accept IP
addresses ser ved by the Netopia 3347W/3357W-ENT.
b. Some Windows
versions follow a path
like this: Start menu -> Control Panel -> Network
and Internet Connections -> Network
Connections -> Local Area Connection ->
Properties -> Internet Protocol [TCP/IP]
-> Properties