Netopia 3347W - Manual (Page 26)

6-2 Getting Started Guide
Quick Easy Setup Connection Path
This section may be all you need to configure your Netopia 3347W/3357W-ENT ADSL Wireless Router. Your
ser vice provider will supply you with several parameter values. Below is a handy checklist:
DSL Line Configuration Screen
Trellis Coding Enabled
❑
On (default) or
❑
Off
Fast Retrain Enabled
❑
On (default) or
❑
Off
Wiring Type
❑
Tip/Ring (Inner Pair) (default) or
❑
AutoSense
❑
A/A1 (Outer Pair)
Data Link Encapsulation
❑
RFC1483 (default)
or
RFC1483 Mode:
❑
Bridged 1483 (default) or
❑
Routed 1483
(for Bridged 1483 only)
PPP over Ethernet (PPPoE)
❑
Off (default) or
❑
On
❑
PPP PPP Mode:
❑
VC Multiplexed (default) or
❑
LLC SNAP
Data Circuit VPI
Data Circuit VPI 0-255 (8 is default)
0-65535 (35 is default) _______________________
_______________________
Easy Setup Profile Screen
Address Translation
Enabled:
❑
Yes (default) or
❑
No
IP Addressing:
❑
Numbered (default) or
❑
Unnumbered
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________ (for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
(for PPP DLEs only)
PPP Authentication:
❑
None (default),
❑
PAP or
❑
CHAP
(for PAP or CHAP)
User Name (or Host Name):
_______________________ (for PAP or CHAP)
Password (or Secret):
_______________________
IP Easy Setup Screen
Ethernet IP Address:
Ethernet Subnet Mask:
_______________________
_______________________
(192.168.1.1
255.255.255.0
are defaults)
Domain Name: _______________________
Primar y Domain Name
Ser ver: _______________________
Secondar y Domain Name
Ser ver: _______________________
Default IP Gateway: _______________________
Easy Setup Security Configuration Screen
Write Access Name: _______________________ Write Access Password: _______________________