V90s desktop ip phone, Standards supported – NetComm V90s User Manual

Page 2

background image


ABN 85 002 490 486

PO Box 1200, Lane Cove NSW 2066 Australia

P: 02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au W: www.netcomm.com.au

DYNALINK NZ 224b Bush Road, Albany, Auckland, New Zealand
P: 09 448 5548 F: 09 448 5549 E: sales@dynalink.co.nz W: www.dynalink.co.nz

Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.



V90s Desktop IP Phone

IP Telephone with Power over Ethernet (PoE) Support


Your NetComm dealer:

Standards Supported

SIP V2.0 Standard (RFC 3261)

SDP (RFC 2327)

Digest authentication and MD5 encryption (SIP)

ITU-T G.711 Alaw/Ulaw, G.729A, G.729AB,


RTP (Real Time Transmission Protocol) RFC1889

RTCP (Real Time Transport Control Protocol)

RFC 3550

Proprietary Firewall-Pass-Through Technology

Simple Traversal of UDP over NAT (STUN)

Web-based Management

PPP over Ethernet (PPPoE)

PPP Authentication Protocol (PAP)

Internet Control Message Protocol (ICMP)

TFTP Client

Hyper Text Transfer Protocol (HTTP)

Dynamic Host Configuration Protocol (DHCP)

Domain Name System (DNS)

Out-band DTMF Relay: RFC 2833 and SIP Info

SIP proxy address in DHCP (RFC 3361)

Software Features

Built-in HTTP, Phone Menu for accessing internal


PPPoE Client

NAT Broadband Router functions

DHCP Client

DHCP Server

Firmware On-line upgrade

Phone Book

Memory Dial

Speed Dial

Caller ID

Multiple Language Support

Hardware Interface

Ethernet PC & Network Port (2 x RJ-45,


DC Jack

Headset Port

Centralised configuration and management

The V90 terminal can download a configuration file from an HTTP server that will prompt it to upgrade its firmware
file. A DHCP server is used to assign an IP address to the V90 phone and inform the V90 of the HTTP address
of the configuration file.

Programmable Function Keys

The V90 features 5 user programmable keys that can be used for speed dialling or any number of common
everyday tasks.

Quality of Service

The built in QoS of the V90 guarantees that call quality is maintained and monitored to give you crisp clear
calls with no drop out or stuttering.

Key Features

SIP 2.0 standardization deployed throughout
Advanced audio processing – jitter buffer with packet delay and packet loss concealment
Voice packetization & flexible voice compression
Programmable voice packet payload size
Centralised control of codec negotiation
In-band and Out-band DTMF transport
G.168 Echo Cancellation
Two Ethernet ports supporting router and bridge mode
Call Redial, Flash, Mute
Caller ID / Call Waiting
Call Hold/Forward/Conference/Transfer (attended/unattended call transfer)
Phone Book Memory Dialing
Speed Memory Dialing
Hands Free Dialing
Hotline Dialing
Call history for incoming, outgoing and missed calls
Programmable Generic Function Key Definitions (automatic adding prefixes/customized LCD menu)
Soft Login/Logout key for SIP registration
128x64 dot matrix LCD with back light
Full Duplex Speakerphone
Auto Provisioning Support
Firmware upgrading, loading configuration, phone status reports via Centralized Management tool
Local Music on Hold