Nortec Industries Airfog Series - Manual (Page 33)

10-20
Page 26
2008-04-11
(9) Control Panel installation for standard Octo hardware is explained in the under
Control Panel section.
(10) The nozzles on the Octo units are pointed straight forward when shipped but these
can be oriented in any direction that will not have the plume strike a solid object or
another plume for at least 16 feet. Figure 9 AFE Octo Nozzle Spray Pattern helps
in visualization of these AIRFOG plumes.
(11) The center vertical rail is to be mounted in the center of the duct and attached to
the manifold rails using the supplied hardware. It is important that the center
vertical rail is sized correctly and securely fastened to the top and bottom of the
duct.