NISSAN 2010 Altima Coupe - Manual (Page 100)

6. Enter the name of the 2nd street.
After finishing the entry, select “List”. A list
screen is displayed.
7. Select a street as the 2nd street from the
list.
8. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
SETTING A CITY CENTER
The system can calculate a route to the center of
a city, without setting a specific location.
NDE0065 NDE0066 NDE0067
Setting a destination 4-29