NISSAN 2010 Altima Coupe - Manual (Page 79)

4. Select the preferred destination from the
list. The position of the selected location is
displayed in the preview on the right side of
the screen.
INFO:
● A maximum of 100 facilities can be displayed
on the list screen.
● If the suggested route is already set, the sys-
tem displays only the facilities located along
the route.
5. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
If there is a route already set, the new selected
location becomes a waypoint.
Other settings:
The destination can be set by touching the cur-
rent or scrolled location map screen and select-
ing “Nearby Places”.
INFO:
Voice command
1. Press located on the steering wheel
switch.
2. After the tone sounds, speak a command.
To display the nearby category list and se-
lect the destination from it:
“Navigation” “Places” (Standard mode)
“Places” (Alternate command mode)
NDE0014 NDE0015 NDE0019
4-8 Setting a destination