Installation, Installation -3 – NETGEAR RangeMax Next Wireless PCI Adapter WN311T User Manual
Page 15
NETGEAR RangeMax NEXT Wireless PCI Adapter WN311T User Manual
Basic Setup
1-3
v2.0, February 2007
Your WN311T Wireless PCI Adapter factory default basic settings are:
•
Network Name Service Set Identification (SSID): Any (First available network)
•
Network Mode (Infrastructure or Ad-hoc): Infrastructure
•
Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled
Installation
The instructions in this chapter explain how to install the WN311T to connect to a network with an
access point or router. Wireless security, advanced settings, and Computer-to-Computer (Ad Hoc)
instructions are covered in
Chapter 2, “Network Connections and Wireless Security”
To install the WN311T Wireless PCI Adapter:
1. First, install the WN311T software.
Insert the NETGEAR CD. If the CD main page does not appear, double click Autorun.exe on
the CD.
a.
Click Install the Software.The Check for Updates window opens.
Note: In order for the WN311T Wireless PCI Adapter to communicate with a wireless
access point or wireless adapter, all devices must be set up to use the same
wireless network name (SSID).
Figure 1-1