NETGEAR RangeMax Next Wireless PCI Adapter WN311T User Manual
Page 16
NETGEAR RangeMax NEXT Wireless PCI Adapter WN311T User Manual
1-4
Basic Setup
v2.0, February 2007
2. Now, insert the wireless PCI adapter.
a.
When prompted, shut down the computer.
b. Unplug the computer, open the case, and install the WN311T into a PCI slot.
c.
Connect the antenna to the adapter and position the antenna to the up position.
d. Close the case, plug the power cord back in, and restart your computer.
You will be prompted to select the country where you are located.
e.
Select the country and click Agree.
3. Use the Smart Wizard to set up your wireless PCI adapter.
a.
Windows 2000 users go to Step b. Windows XP or Vista users can set up the wireless
adapter either with the NETGEAR Smart Wizard (recommended) or the Windows
configuration utilities.
Figure 1-1
Figure 1-2