Network Technologies RACKMUX-T15 - Manual (Page 51)

NTI RACKMUX RACKMOUNT ANSI TERMINAL DRAWER
47
11. DC POWER OPTION
If the RACKMUX has been ordered with the DC Power option (“48V” at the end of the model number), a 3-terminal block has
been provided for connection to a 36-72VDC 2A power source. The terminal block can be easily removed from under the
protective bracket to make connections. Proper connections are indicated.
Note: Be sure to properly secure the terminal block to the RACKMUX after wire insertion.
An earth ground terminal has been provided for optional use.
Figure 15- RACKMUX with DC Power option
Figure 16- Apply wires to terminal block
Phillips
screwdriver
Power supply
ground
terminal block
Remove screws
to remove
terminal block
CAUTION: RISK OF ELECTRIC SHOCK
36-72VDC PRESENT ON DC POWER INPUT
36-72VDC
REAR VIEW OF RACKMUX-T1548V
Earth ground connection
protective bracket
Remove screws to remove
terminal block