Network Technologies RACKMUX-T15 - Manual (Page 9)

NTI RACKMUX RACKMOUNT ANSI TERMINAL DRAWER
5
1.1.2 Optional Telco 2-Post Mounting
If the Telco 2-post mounting bracket kit (RL-T15-TEL ) is to be used, secure the short and long brackets to each side of the drawer
as shown in Fig. 3. Apply 2 nuts (supplied) per bracket to secure the brackets to the drawer. Apply two #10-32x3/4” screws
(supplied) per bracket to the post at the desired height. Slots are provided in the brackets to make minor depth adjustments
easy. Be sure to properly tighten all nuts and screws before using the drawer.
Figure 3- Mount to Telco post with optional mounting brackets