A. click the add button, B. select protocol, and then click add, C. select microsoft – NETGEAR MA101 User Manual
Page 49: D. select tcp/ip, and then click ok
Advertising
43
You must have an Ethernet adapter or an MA101, the TCP/IP protocol, and
the Client for Microsoft Networks.
If you need to add TCP/IP:
a.
Click the Add button.
b.
Select Protocol, and then click Add.
c.
Select Microsoft.
d.
Select TCP/IP, and then click OK.
Note: It is not necessary to remove any other network components
shown in the Network window in order to install the adapter, TCP/IP, or
Client for Microsoft Networks.
Advertising