Numark Industries AXIS 8 Premium - Manual (Page 14)

AXIS 8
- The Leader in DJ Technology
©2001 Numark Industries - 14 - http://www.numark.com
SPECIAL EFFECTS
Your AXIS 8 is equipped with some of most advanced effects
on the market today. To fully take advantage of these effects
it’s helpful to practice and understand their use.
EFFECT SELECTION
To select and activate an effect tap on it’s button, it will light to indicate activation and effect will indicate in the display. To put the effect into hold
mode or active alternate effects press the center button. The button will light indicating the hold has been activated and hold will show in the display.
To release any button, tap it once again.
EFFECT PARAMETER SELECTION
Once an effect is active, rotate the wheel to the desired parameter. The Parameter for most effects
will show in the display above the effect indication. Note: For all effects except reverse, pitch bend
on the jog wheel will be deactivated so you must use the pitch bend buttons instead.
NOTE: The effect parameter can also be preset or changed without activation. Press on the
desired effect and rotate the wheel without releasing the button. When the desired parameter is reached in the display, release the button. If an
effect is already playing, the new parameter will be heard upon button release. If the effect is not active, then the next time the effect is activated it
will be set to play from this parameter in “hold” mode. If you wish to preset an alternate effect such as SLIDE, PAN, or KILL press the hold button
first, then hold down the effect button and spin the wheel as described above.
EFFECTS:
SCRATCH – This effect makes it possible for the wheel to scratch the music while it is playing. If you move
the wheel back and forth the music will stop and play slowly as the wheel is moved similar to scratching a
record. There are two modes of operation for this effect. By pressing
followed by the scratch button
you can toggle between “ ” and “ ”. In “Scratch 1” the unit automatically returns to play
when the wheel stops moving. In “Scratch 2”, when the wheel is brought to a stop the music will stop and
when you push the wheel forward the unit will automatically play.
SCRATCH HOLD – This effect works like the above except the music will not release when the wheel is
pushed forward. It is basically the same as scratching on a powered off turntable.
Scratch is similar to working with a playing turntable, while the Scratch hold is similar to scratching a
turntable with the power off.
PHAZE – Creates an effect on the music similar to the sound of an airplane taking off. As the wheel is
moved the effect is created. If the wheel stops moving the effect will return to the beginning on it’s own. If
the effect is in “Hold” the effect will stay at the current sound until the effect is released by the button or hold
removed.
SONAR – creates a metallic hollow effect to create a slightly different sound. The wheel works a similar way
as Phaze.
SLIDE – Smoothly changes the key of the music. In the key display you will see
the key change as the wheel is moved.
ECHO – this effect adds echo to the music also based upon the Beatkeeper™. The start parameter is no
echo “0”. If you move the wheel to the right the numbers will go 1-64, 1-32, 1-16, 1-8, 1-4, 1-2, and 1-1
indicating the amount of echo added to the unit. If you
move the wheel to the left you will create negative or
preceding echo. This essentially plays the music before
you get to it. At 1-1 the music will echo 1 full measure
or 4 beats of music. If you turn off the effect then back
on again it remembers the last set parameter.
(Note: a preceding echo requires the unit to play from
buffer memory. If the buffer becomes unavailable the
effect will stop until buffer is regained.)