Setting cue points, Axis 8 – Numark Industries AXIS 8 Premium User Manual

Page 9

Advertising
background image

AXIS 8

- The Leader in DJ Technology

©2001 Numark Industries

- 9 -

http://www.numark.com

SETTING CUE POINTS

PLAY and CUE

Pressing the “PLAY” button starts the disc. Pressing the “CUE” button will reset the disc to the last place where the disc was
started. This is called the cue point. By alternately pressing the “PLAY” button and the “CUE” button, the disc may be returned

and played from the cue point any number of times. This function is called back cue.

PLAY, PAUSE and CUE

Pressing “Play” to start then pressing “Pause” and then “Play” again, a new cue point will be set. Pressing “Cue” will return to the

last pause position and will be the new cue point.

EDITING CUE POINT

When the jog wheel is turned while paused, a new cue point can be located. By pressing “PLAY” while paused that point will
be set. By pressing “PLAY” again (STUTTER) the point can be checked as desirable.

Advertising