Numark Industries AXIS 8 Premium - Manual (Page 6)

AXIS 8
- The Leader in DJ Technology
©2001 Numark Industries - 6 - http://www.numark.com
FEATURES
1. PLAY/STUTTER- To start the music from the initial cue
point.
2. PAUSE- To pause the music.
3. CUE- To move the music to the cue point and preview the
selection.
4. WHEEL- Used for various functions such as cueing,
scratching, pitch bend, searching, and effect control
5. LCD DISPLAY- Indicates all the functions, as they are
occurring, with the CD.
6. OPEN/CLOSE- Pressing will open or close the disc tray on
the transport.
7. SING- To set play mode in single or continuous play.
8. TIME- Controls display indication of time mode.
9. PROGRAM- Used for setting track order and various
special commands.
10. TRACK SELECT/SEARCH-
Rotation – selects tracks
Pressing while rotating – selects tracks +10
Pressing once- Puts wheel in search mode.
11. PITCH- Actives and sets pitch slider range.
12. -,+ - Works as pitch bend and controls key and pitch
functions.
13. KEY- Used for various key control.
14. PITCH SLIDER- Controls the overall speed of the music.
15. PITCH RANGE LED- Indicates current pitch range of the
pitch slider
16. EFFECT BUTTON- Used to determine desired effect.
17. EFFECT HOLD- Used to set effects to an alternate
position
18. LOOP IN- Used to set stutter and loop in points.
19. LOOP OUT- Used to set loop out points and release the
loop.
20. RELOOP/STUTTER- Used for repeated play (stutter) from
the loop in point, repeating a previously set, and hot start.
21. RELAY- Used for setting Alternating play start between
attached units.
22. BEAT SYNC with MARCHING BAR GRAPH- Tracks the
beats and measure position of music
23. CD Illumination Light – lights up the CD drawer and CD
when open.
24. CD Drawer – Place your CDs you wish to play in here.
This unit is designed to play commercially available CD
and properly burned and finalized CDR and CDRW
formats. Due to variances on the specification of certain
CD burners and CDs some discs home made CDs may not
play properly.