Nuvo NV-T2SIR - Manual (Page 10)

0728
3033118
RT E E T K N I
CM
Model NV-T2SIR
Dual SIRIUS Ready AM/FM Tuner
www.nuvotechnologies.com
NuVo Technologies LLC Hebron, KY USA •
CONFORMS TO UL
STD.60065 CERTIFIED TO CAN/CSA STD. C22.2 No.60065:06
RS 232
SYSTEM ANTENNA
IN NuVoNet
USE NV-T2FAA
ANTENNA
IR INPUT
L
AUDIO
R
TUNER A
SIRIUS
L
AUDIO
R
TUNER B
RoHS
SIRIUS
1 4 5 6 7 2 3
Back Panel Features
1. Antenna Input: This single “F” connector is the coaxial cable connection between the T2SIR and the included NV-T2FAA AM/FM
antenna.
2. Audio Output: The audio broadcast for AM, FM, or SIRIUS Satellite Radio received by the Tuner module is available through this
stereo RCA output. Tuner A and B offer independent audio outputs for use with the NuVo audio systems or third
party receivers and amplifiers.
3. SIRIUS: This eight-pin connection is a universal SIRIUS communication port. It allows a third party SIRIUS Tuner module to fully
communicate with the Grand Concerto or Essentia E6G NuVoNet Systems.
4. IR Input: The T2SIR offers a single stereo mini, 3.5mm connection for independent IR control of both Tuner A and B.
5. NuVoNet: This single CAT5 connection provides full NuVoNet communication for both Tuners A and B to the NuVo Grand Concerto
and Essentia E6G audio distribution systems. This connection is made at the Grand Concerto EZ Port or the Essentia
E6G Allport.
6. RS232: This DB9 9-pin connector is used for configuration programming (see page 17, V. Using the T2 Configurator Software)
and bidirectional serial control from a third party home automation controller.
7. AC Power: The T2SIR is designed to plug into any AC power source.
5