Nuvo NV-T2SIR User Manual

Page 17

Advertising
background image

12

Tuning Mode (Fig. 15): Tuning Mode has four choices
that set defaults for the way in which the T2SIR will
tune through channels or frequencies. The SIRIUS only
functions will be grayed out when a SIRIUS receiver is
not present.

Seek Tune (Am/FM only): Seek Tune searches
for strong frequencies in AM/FM bands and
will stop at the next frequency that meets the
set tuning parameters. This menu option
turns seek on or off. When Seek Tune is
turned off, Step Tune is the default.
Preset Tune: When turned on, the Preset Tune
mode will only stop at channels or
frequencies that have been saved as presets.
Parental Lock (SIRIUS only) (Fig. 16): This
requires a 4-digit security code. The default
parental lock code is 5555. To access the sub-
menus, you must enter the default 5555. This
is done by using the Up arrow to scroll to the
first 5, then touching OK on the front panel
moves the highlight to the second number.
When 5555 is set, you will then have access
to the Parental Lock setup.

Set Security Code (Fig. 17): This lets
you set a new code for Parental Lock
purposes. The new code is set in the
same way as the default 5555
described above. Once the new code
is set, it will replace the default.
Locked Channels: This is a complete
list of the available SIRIUS channels.
When specific channels are
highlighted and selected, they are
added to the Parental Lock feature
and will require the 4-digit security
code before audio is enabled.

Skipped Channels (SIRIUS only): This allows
you to highlight and select unwanted
channels from the SIRIUS channel lineup.
These selected channels are removed from
SIRIUS tuning. They can be added back in at a
later date by highlighting the channel and
touching OK, removing the associated check
mark.

Fig. 15

Fig. 16

Fig. 17

Tuning Mode

Seek Tune

Preset Tune

Lock Code? [9]

5555

Parental Lock

Set Security..

Lock Channel...

Set Lock [9]

0000

Advertising